Convector FCF.EL

Features and applications of electric convector FCF.EL

The FCF.EL convector is analogous to a floor convector with water as a heat carrier. The main difference of the electric convector is its heating element – in this model heaters in pair with the tangential DC 24V fan are used. The power of the heaters reaches 1/2/4/6 kW and can be programmed (forced mode and power limit) according to your needs in the settings menu.

The complete set of a thermal curtain of FCF.E includes the set of automatic equipment necessary for correct work of the electric device, and also a longitudinal aluminum lattice in color "satin".

It is possible to make an electric convector of another width, in particular up to 150 mm with a step of 5 mm.

Basic settings:

• temperature decrease – the value of temperature decrease from 1°С to 10°С is set, at which additional heating is switched on and the flow of warm air increases;
• switch-off delay – the time from 1 to 30 minutes during which heating proceeds is established;
• forced mode – set the operating time from 1 to 8 hours of forced heating;
• power limit – the maximum heating power is set to 1, 2, 4 or 6 kW for all modes.